«LOCOS PC»process

Application area

Treatment of process condensates from sulfides at oil refining and petrochemical facilities.


Oxidation of toxic, corrosive sulfides, hydrosulfides contained in process condensate by air oxygen to inert, odorless hydrosulfate and sodium thiosulfate catalyzed by KSM catalyst at 60÷80°C and pressure of 0.5 MPa.

Concentration of sulfide sulfur in process condensate may be up to 5000 mg/dm3 (0.5% wt.). After treatment the residual content of sulfide sulfur (hydrogen sulfide) in process condensate does not exceed 20.0 mg/dm3 (0.002 wt%).

Technology description

Schematic diagram of process condensate treatment:

Process condensate treatment_technology

Process condensate from different plants separated from oil and mechanical impurities is accumulated in tank D-101, pumped by P-101A/B to heat exchanger E-101, where it is heated to 60 ÷ 80°C, mixed with air and supplied through distributor to the bottom of reactor R -101. Pressure at the top of R-101 is maintained at 0.5 MPa. Oxidation of sulfide sulfur proceeds in a continuous-flow mode on the surface of heterogeneous KSM-X catalyst:

H2S +2NaHS + 4O2 →NaHSO4 + NaHS2O3 + H2O

9NaSH + 10O2 → 4Na2S2O3 + NaHSO4 + 4Н2О

Na2S + 2O2 → Na2SO4

Treated process condensate with exhausted air from the top of reactor is fed to degasser D-102. Process condensate from the bottom of degasser flows into cooler E-102 and then sent to water treatment unit. Exhaust air from the top of D-102 is sent to the furnace for combustion.


Technology effectively and sustainably operates in a wide range of hydrogen sulfide concentrations, does not require large consumption of heat and reagents, carbon steel units are used in the process.

KSM catalyst having high mechanical strength and chemical resistance to acids and alkalis, allows reducing temperature and volume of the reactor. No need for its periodical or continuous feeding with expensive variable valence metal compounds. This prevents cobalt phthalocyanines and derivatives, as well as salts of other heavy metals from getting into wastewater. Guaranteed service life of KSM catalyst is 8 years. During operation, catalyst does not require additional regeneration since it runs in parallel with reaction of sulfur compounds oxidation.